To select one or more channel- storage banks while scanning, select each bank you want to scan by press- ing its number key so the bank’s num- ber appears on the display.
CH 
To turn off
Notes:
•You can manually select any channel in a bank, even if the bank is turned off.
•You cannot turn off all three banks.
•The scanner skips channels that have been locked out (see “Skip- ping Frequencies/Channels” on Page 23).
MANUALLY SELECTING A CHANNEL
You can continuously monitor a spe- cific channel without scanning. This is useful if you hear an emergency broadcast on a channel and want to hear all the details (even though there might be periods of silence) or if you want to monitor only a specific chan- nel or a
22
Follow these steps to manually select
achannel.
1.Press MANUAL.
2.Use the number keys to enter the channel number you want to hear, then press MANUAL again.
Notes:
•If your scanner is scanning and stops at the channel you want, simply press MANUAL to manually select the channel.
•If you repeatedly press MANUAL, the scanner steps through the channels.
