Radio Shack PRO-29 owner manual Important Information about the External Power Jacks

Models: PRO-29

1 40
Download 40 pages 17.33 Kb
Page 7
Image 7

20-509.fm Page 7 Wednesday, August 4, 1999 1:58 PM

3.Install two batteries in the compartment and two in the cover as indicated by the polarity symbols (+ and –) marked inside.

Caution: Use only fresh, AA alkaline, nickel-cadmium, or general purpose batteries of the required size. Never mix fresh and old batteries or different types of batteries.

4. Replace the cover.

If BATT.Lo flashes on the display and the scanner beeps every 15 seconds, immediately replace or recharge all four batteries.

IMPORTANT INFORMATION ABOUT THE EXTERNAL POWER JACKS

The scanner has two external power jacks — POWER and CHARGE. It is important that you understand the purpose of each jack before you connect any adapter to the scanner.

POWER

CHARGE

The POWER jack powers the scanner and disconnects the internal bat- teries. You can use this jack to connect an external power source (AC or DC adapter) regardless of the type of batteries you install.

7

Page 7
Image 7
Radio Shack PRO-29 owner manual Important Information about the External Power Jacks