Radio Shack TAD-285 owner manual Telephone Operation, Using Redial, Using Flash

43-785.fm Page 15 Monday, August 16, 1999 7:54 AM

TELEPHONE OPERATION

You can make and answer calls with this telephone as you would with any other phone. Read this section to learn about special features.

Note: When you receive a call, the telephone rings and the lighted ringer bar flashes.

For example, if you subscribe to Call Waiting, you can put your current call on hold and answer another call on the same line by pressing FLASH. Press FLASH again to alternate be- tween the two calls.

Note: If you do not have any special telephone services, pressing FLASH might disconnect your current call.

USING REDIAL

To quickly dial the last number dialed, press REDIAL. The redial memory stores up to 32 digits in both the tone and pulse modes so you can quickly redial local as well as long-distance numbers.

Illust.

USING FLASH

Many special phone services, such as Call Waiting, require a switchhook sig- nal. Pressing FLASH provides the electronic equivalent of a switchhook operation.

USING TONE SERVICES WITH A PULSE LINE

Some special services, such as alter- nate long-distance and bank-by- phone, require tone signals. If you have pulse service, you can still use special services by following these steps.

1.With P/T set to P, call the special service.

2.When the service answers, press

. Any additional numbers you dial are sent as tone signals.

3.Follow the normal procedures for the special service you are using.

4.When you complete the call, hang up the phone. The phone auto- matically changes back to the pulse mode.

Illust.

15