5.Plug the exposed end of the cord into a modular phone jack wall plate.
Illust.
Directly on the Wall
Using a drill and screws (not supplied) and the supplied mounting bracket, you can easily mount your
1.At the desired mounting location, drill two holes 31/4 inches apart, one above the other.
Illust.
6.Line up the keyhole slots on the bracket with the studs on the wall plate, then slide the bracket down onto the wall plate until it is secure.
7.Pull the handset holder toward you as far as it will go. Hold it out as you rotate the holder 180°, then let it snap back in place.
Illust.
The holder’s tab helps hold the handset in the cradle while the answering system is mounted on the wall.
8.Proceed to “Connecting the Hand- set” on Page 10.
2.Thread a screw into each hole until the screw’s head extends about 1/8 inch from the wall.
Illust.
3.Plug one end of the supplied mod- ular cord into PHONE JACK.
Illust.
9
