Radio Shack TAD-285 Placing the Phone on a Desktop, Mounting the Phone, On a Wall Plate

43-785.fm Page 8 Monday, August 16, 1999 7:54 AM

PLACING THE PHONE ON A DESKTOP

To use your answering system on a desk, table, or shelf, plug one end of the supplied telephone cord into PHONE JACK and plug the other end into a modular phone jack, then pro- ceed to “Connecting the Handset” on Page 10.

Illust.

MOUNTING THE PHONE

Using the supplied mounting bracket, you can mount the TAD-285 on a phone jack wall plate or directly on the wall.

On a Wall Plate

1.Plug one end of the supplied mod- ular cord into PHONE JACK.

Illust.

8

2.Align the adapter’s power cord with the left slot on the top and bottom of the mounting bracket. Align the modular cord with the right slot on the top of the mount- ing bracket. Pull the other end of the modular cord through the large hole in the center of the bracket.

3.Insert the mounting bracket’s tabs into the slots on the bottom of the answering system. Then pull the bracket up until it snaps into place.

Illust.

4.Coil all the excess modular cord into the recess of the mounting bracket by pushing it back through the large hole. Leave only about 1–2 inches of the cord outside the bracket.