Playing files stored on USB memory
devices
1Press iPod/USB to switch the input source to “iPod/
USB”.
2Connect the USB memory device to the USB port.
(v p. 20)
3Press “MODE” to select “Folder” or “All”.
nAbout the display
0When “Folder” is selected
All the files in the selected folder are played.
0When “All” is selected
After the selected folder and files are played, all the files in all
the folders are played.
4Use ui to select the file or folder, then press ENTER.
5Use ui to select the file, then press ENTER.
Playback starts.
oResume function
This unit stores the point at which playback of a file was stopped.
0Resume playback works even if the USB memory device is
disconnected and then reconnected. However, if a different USB
memory device is connected, the resume information for the
previous USB memory device is deleted.
0The resume information may be deleted when the USB memory
device is removed and files are added or deleted.
0Press 2 while playback is stopped to delete the resume information.
“Resume Off” is displayed.
NOTE
0Do not remove the USB memory device from the unit when the USB memory
communication indicator is flashing. Doing so may damage the USB memory
device, or may corrupt the files recorded on the USB memory device.
0Note that Marantz will accept no responsibility whatsoever for any problems
arising with the data on a USB memory device when using this unit in conjunction
with the USB memory device.
Contents Connections Playback Settings Tips Appendix
43
Front panel Display Rear panel Remote Index