Contents | Connections | Playback | Settings | Tips | Appendix |
oOperations cannot be performed through the remote control unit
Symptom |
| Cause / Solution | Page |
Operations cannot be | 0 | Batteries are worn out. Replace with new batteries. | 5 |
performed through the |
|
|
|
0 | Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within | 5 | |
remote control unit. |
| 30°. |
|
| 0 | Remove any obstacle between this unit and the remote control unit. | － |
| 0 | Insert the batteries in the proper direction, checking the q and w marks. | 5 |
| 0 | The set’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb | － |
|
| light, etc.). Move the set to a place in which the remote control sensor will not be exposed to strong light. |
|
| 0 | When using a 3D video device, the remote control unit of this unit may not function due to effects of | － |
|
| infrared communications between units (such as TV and glasses for 3D viewing). In this case, adjust the |
|
|
| direction of units with the 3D communications function and their distance to ensure they do not affect |
|
|
| operations from the remote control unit of this unit. |
|
| 0 | When using this unit independently, set the switch to “INTERNAL”. | 22 |
oDisplay on this unit shows nothing
|
|
Symptom | Cause / Solution |
Display is off. | 0 Press DIMMER, and change the setting to anything other than off. |
Page
27
Front panel | Display | Rear panel | 54 | Remote | Index |
