Radio Shack TAD-725 owner manual Setting the Number of Rings, Setting the DAY/TIME

43-725.fm Page 13 Tuesday, February 23, 1999 2:47 PM

Repeatedly press VOLUME until you hear the desired ringer setting. Each time you press VOLUME, the ringer changes in this order:

High-volume, high-pitch

Low-volume, high-pitch

High-volume, low-pitch

Low-volume, low-pitch

SETTING THE NUMBER OF RINGS

Set RING TIME on the side of the base to 3, 5, or T/S to select how long the TAD waits to answer a call (3 rings, 5 rings, or toll-saver).

Note: If you plan to check messages by long distance, set RING TIME to toll-sav- er (see “Using the Toll-Saver” on Page 25).

SETTING THE DAY/TIME

You must set the day of the week and time so the TAD can record the correct day and time of each message.

REPEAT

CLOCK SKIP

Note: Enter each key press within about 2 minutes. Otherwise, the TAD exits the time setting process and you must begin again with Step 1.

1.Hold down CLOCK until the TAD beeps. The TAD announces the cur- rently set day and displays the day’s number (0 for Sunday, 1 for Mon- day, and so on).

2.To change the day of the week, re- peatedly press SKIP to move for- ward or REPEAT to move backward. To set the correct day of the week when it displays, press CLOCK.

3.The TAD announces the hour. To change the hour, repeatedly press SKIP or REPEAT. To set the correct hour when it displays, press CLOCK.

4.The TAD announces the minutes. To change the minutes, repeatedly press SKIP or REPEAT. To set the correct minutes when they display, press CLOCK.

5.The TAD announces “AM” or “PM,” and A or P appears. Press SKIP or REPEAT to change this setting. Press CLOCK again to set “AM” or “PM.”

13