Radio Shack TAD-727 owner manual Installation, Mounting the Phone, On a Desk

43-727.fm Page 10 Monday, December 20, 1999 4:28 PM

INSTALLATION

MOUNTING THE PHONE

You can place the TAD-727's base on a desk or table, mount it on a standard wall plate, or mount it directly on a wall. Choose a location that is:

•near an AC outlet

•near a telephone line jack

•out of the way of normal activities

•away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless intercoms, alarms, and room monitors

•away from other cordless phones

The base's location affects the hand- set's range. If you have a choice of sev- eral locations, try each to see which provides the best performance.

Caution: You must use a Class

!2 power source that supplies 9 volts DC and delivers at least

500 mA. Its center tip must be set to negative and its plug must fit the TAD- 727's DC 9V AC ADAPTER jack. The sup- plied RadioShack adapter was specifi- cally designed for your TAD-727. Use only the supplied adapter. Using an adapter that does not meet these speci- fications could damage the TAD-727 or the adapter.

Notes:

•Your telephone connects directly to a modular phone line jack. If your phone line jack is not a modular jack, you can update the wiring yourself, using jacks and adapters

available from your local RadioShack store. Or, you can let the telephone company update the wiring for you.

•The USOC number of the jack to be installed is RJ11C, or RJ11W for a wall plate jack.

On a Desk

Follow these steps when you place the base on a desk or table.

1.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.

2.Plug the modular cord's other end into a modular phone line jack.

3.Insert the supplied AC adapter's barrel plug into the DC 9V AC ADAPTER jack on the back of the base.

10