2.Repeatedly press PREVIOUS or SKIP on the base until the TAD announces and displays the number of rings you desire – “two” so the TAD answers on the second ring, “five” for fifth ring, or “toll saver” when you want to use the
PREVIOUS
PLAY/
REPEAT
SKIP
3.Press ANSWER or PLAY/REPEAT/
. The TAD sounds a long beep and announces the selected num- ber of rings.
Note: Press each button within 30 sec- onds. If you take longer, the setting pro- cedure is canceled automatically.
SETTING THE DAY
AND TIME
You must set the day and time so the TAD can record the correct day and time of each message.
1.Hold down STOP on the base until a long beep sounds. The TAD announces the day of the week. CL flashes on the digital display.
STOP
2.Press PREVIOUS or SKIP until the TAD announces the correct day of the week.
3.Press PLAY/REPEAT/ 
.The TAD announces the hour and “AM” or “PM.”
4.Press PREVIOUS or SKIP until the TAD announces the correct hour, including AM or PM.
5.Press PLAY/REPEAT/ 
.The TAD announces the minute.
6.Press PREVIOUS or SKIP until the TAD announces the correct minute.
Holding down PREVIOUS or SKIP advances the minute rapidly and announces minutes in 10 minute increments. Release PREVIOUS or SKIP and the TAD announces the minute setting. If you advance too far when holding down PREVIOUS or SKIP, press the opposite button.
7.Press PLAY/REPEAT/ 
. The TAD announces the minute and sounds a beep. Then the seconds start to count from 0.
22
