The TAD announces “You have xx new message(s)” (where xx is the numbers of messages) or “You have no messages”, then the TAD plays back the recorded messages contin- uously. When you have both old and new messages, the TAD first plays back only new messages. Press 8 to hear old messages.
3.During playback, you can press the number key for the command you want.
|
| Press: | To: |
|
|
|
|
|
|
|
|
7 |
| Skip to the previous | |
|
|
| message. |
|
|
|
|
8 |
| Repeat the current | |
|
|
| message. |
|
|
|
|
9 |
| Skip to the next mes- | |
|
|
| sage. |
|
|
|
|
|
|
| Stop message play- |
|
|
| back. |
|
|
|
|
0 twice within | Delete the current mes- | ||
2 seconds | sage. | ||
|
|
|
|
After all messages have been played back (or you finished playing back by
pressing 
), you can continue to ac- cess other features.
To record a new outgoing message:
1.Press 1 twice within 2 seconds. The TAD beeps.
2.Record your new outgoing mes- sage.
3.Press 1 or 
. A beep sounds and the recorded outgoing message plays back.
To record a memo:
1.Press 3. The TAD beeps.
2.Record your message.
3.Press 3. The TAD beeps and the recorded memo plays.
To listen to help guidance:
Press 
and the TAD plays a series of voice prompts to guide you through re- mote operation.
To set the TAD to answer/not answer calls:
Press 4. The TAD announces the cur- rent outgoing message or “Answer off.” Repeatedly press 4 during outgoing message playback to turn the TAD on and select between the prerecorded or your own message, or turn the TAD off. You hear “Answer off”.
29
