Radio Shack TAD-739 owner manual Remote Commands

43-739.fm Page 18 Friday, August 13, 1999 2:00 PM

Remote Commands

Press:	To:
[0	Set the TAD to not answer
	calls for both lines. The TAD
	says “Line 1 is off, line 2 is off.”
[1	Set the TAD to not answer
	calls only for line 1. The TAD
	says “Line 1 is off.”
[2	Set the TAD to not answer
	calls only for line 2. It says
	“Line 2 is off.”
00	Set the TAD to answer calls
	for both lines. It says “Line 1 is
	on, line 2 is on.” If no OGM 1
	is recorded in line 1, it says
	“You have no announcement
	one in line 1,” and sounds four
	beeps, then says “Line 2 is
	on.” If no OGM 1 is recorded
	in line 2, the TAD says “Line 1
	is on, you have no announce-
	ment one in line 2.” then
	sounds four beeps.
01	Set the TAD to answer calls
	only for line 1. It says “Line 1 is
	on.” If no OGM 1 is recorded
	in line 1, it says “You have no
	announcement one in line 1.”
	and sounds four beeps. Press
	81[ to record OGM 1.

02Set the TAD to answer calls only for line 2. It says “Line 2 is on.” If no OGM 1 is recorded in line 2, it says “You have no announcement one in line 2.” and sounds four beeps. Press 82[ to record OGM 1.

Press:	To:
#0	Set the TAD to announce only
	for both lines. It says “Line 1 is
	announce-only, line 2 is
	announce-only.” If no OGM 2
	is recorded in line 1, it says
	“You have no announcement
	two in line 1.” Then it sounds
	four beeps and says “Line 2 is
	announce-only.” If no OGM 2
	is recorded in line 2, it says
	“Line 1 is announce-only. You
	have no announcement two in
	line 2.” Then it sounds four
	beeps.
#1	Set the TAD to announce only
	for line 1. It says “Line 1 is
	announce-only.” If no OGM2 is
	recorded, it says “You have no
	announcement two in line 1.”
	Press 91[ to record OGM2.
#2	Set the TAD to announce only
	for line 2. It says “Line 2 is
	announce-only.” If no OGM2 is
	recorded, it says “You have no
	announcement two in line 2.”
	Press 92[ to record OGM2
2, then	Play all messages in the
line num-	selected line. If no message is
ber (0, 1,	recorded, the TAD says “You
2)	have no messages in line x.”
(0 for both	(where x is the line number). If
lines, 1 for	no messages are recorded in
line 1, and	both lines, the TAD says “You
2 for line	have no messages in line 1,
2)	and no messages in line 2.”

18