BEFORE YOU MAKE THE CONNECTIONS
The supplied connection cables in- clude all the lead wires you need to connect the amplifier to ground, power, and your existing autosound system.
Important:
•Do not cut these wires. If you cut any wire, you cannot obtain a refund or exchange on this prod- uct. However, RadioShack will provide warranty service if you cut a wire and find the product is defective.
•If the connectors on your vehicle’s autosound system are not com- patible with the amplifier’s con- nectors, you might need an adapter harness to complete the connections. RadioShack stores sell adapter harnesses for most vehicles.
You might need additional wire, de- pending on your individual autosound system, to complete the connections. Your local RadioShack store carries a full line of wire and wire management accessories.
6
Cautions:
•For added safety and to protect your amplifier and autosound sys- tem, disconnect the cable from your vehicle’s negative
•Be sure your front speakers can handle as much as 20 watts per channel and your rear speakers as much as 55 watts per channel of power. Each speaker must have an impedance of at least 4 ohms. Your local RadioShack store carries a full line of speak- ers.
To make it easier to gauge wire length and connect the amplifier, temporarily place the amplifier as close as possible to the selected mounting location.
