Radio Shack XL-150 owner manual Replacing the Blade-TypeFuse

12-2015.fm Page 24 Tuesday, July 13, 1999 3:47 PM

Replacing the Blade-Type Fuse

1.Disconnect the cable from the vehicle’s negative (–) battery ter- minal.

2.Grasp the fuse’s plastic end and pull it out.

(illustration - show surrounding area, fuse holder, and fuse being pulled out)

24

3.If the fuse is blown, replace it. Use only a blade-type fuse with the proper rating (such as Cat. No. 270-1084). The fuse must be 25 amps.

4.Grasp the fuse’s plastic end and push it in.

5.Reconnect the cable to the vehi- cle’s negative (–) battery terminal.