5.Connect the blue/white wire’s other end to your autosound sys- tem’s switched power lead using one of the supplied
(illus)
This connection turns on the amplifier when you turn on the autosound system, and turns off the amplifier when you turn off the autosound system. This prevents your vehicle’s battery from being drained if you leave your amplifier on when you turn off your auto- sound system.
If your autosound system does not have a switched power lead, connect the blue/white wire’s other end to a point in your vehi- cle’s fuse block that has power only when you turn on the ignition or turn the key to ACC.
This connection turns on the amplifier when you turn on the ignition or turn the key to ACC, and turns off the amplifier when you turn off the ignition. This pre- vents your vehicle’s battery from being drained if you leave your amplifier on when you turn off the ignition.
8
6.Use a screwdriver to connect the spade end of the supplied red power cable (with
7.Connect the other end of the red power cable to your vehicle’s pos- itive (+) battery terminal as shown. Then tighten the terminal.
(illus)
Caution: Due to the amplifier’s high current requirement, you must connect the red power cable’s fused end directly to the vehicle’s positive (+) battery termi- nal or damage to your vehicle’s wiring could result.
Do not reconnect your vehicle’s nega- tive
