CONNECTING GROUND AND SWITCHED/PRIMARY POWER
Follow these steps to connect the am- plifier to ground, switched power, and primary power.
1.If you have not done so already, disconnect the cable from your vehicle’s negative
2.Use a screwdriver to connect the spade end of the supplied black ground wire to the amplifier’s GND (ground) terminal.
3.Connect the black ground wire’s other end to a chassis ground, such as a metal bolt attached to a metal part of the vehicle’s frame. Be sure the bolt is not insulated from the chassis by a plastic part.
4.Use a screwdriver to connect the spade end of the supplied blue/ white wire to the amplifier’s REM (remote power) terminal.
7
