Ramsey Electronics manual Ramsey Electronics Model No. RR1

Ramsey Electronics Model No. RR1

Have you ever been so frustrated with the range of your remote that you go to the extreme of rearranging your entertainment room just to make it work? Tired of having to bounce your IR remote off of ceilings and walls? Do you want to run your system from another room? Here is the answer to your prayers! Extend the range of your remote controls as far as you need; it’s only limited by the length of wire you use!

•IR receiver module with sensitive element can receive your remote control up to 36 feet away before re-broadcasting it.

•The RR1 reconstitutes the receive signal using a PIC micro controller, restores noisy or weak signals, and then re-broadcasts the IR remote signals to your components via a long wire (tested over 500 feet!) to a high-efficiency IR LED.

•Extend the range of your remote control around corners or down floors by running a wire to an IR LED in front of the components you wish to control.

•Works with almost any remote control (38 kHz carrier), does not need to be programmed.

•Will operate from 8V to 16V AC or DC. Use our AC125 wall adapter for long operation.

•LED indicator lets you know when you are receiving an IR signal or not.

RR1 • 1