Rangemaster R9044 The Clock, Setting the Time of Day, Setting the Minute Counter, Full grill

Models: R9044

1 20
Download 20 pages 34.26 Kb
Page 6
Image 6
Full grill

Fig.2-4

ArtNo.303-0001 Setting the clock 1

Fig.2-5

ArtNo.303-0002 Setting the clock 2

Fig.2-6

ArtNo.303-0003 Setting the minute timer

Fig.2-7

ArtNo.303-0004 Setting the cooking time

Make sure that dairy foods, meat and poultry are completely defrosted before cooking.

Full grill

ArtNo.030-0006

This function uses the heating elements in the roof of

the oven.

symbols

9-function oven

 

Preheat the grill for 5-10 minutes before use. The grill pan should be used on the upper shelf position. Make sure to fit the handle when moving the grill pan in and out of the oven.

IMPORTANT: Grilling must always take place with the oven door closed to ensure correct performance of this function. Check your food regularly to avoid overcooking.

The Clock

Setting the Time of Day

When the oven is first connected the display will flash ‘Auto’ and ‘0:00 ’ (Fig.2-4).

To set the clock, press the central button for about 3 seconds

until [tNo.030-] appears (Fig.2-5). Use the ‘+’ and ‘–‘ keys to set the

mer symb

correct time of day. Remember this is a 24-hour clock. A beep will sound, indicating that the clock has been set.

Setting the Minute Counter

To set the minute minder, press the central timer button for about 3 seconds until [C the oven.] appears (Fig.2-6). Using the ‘+’ and ‘–‘ keys, set the required time.

To adjust the duration once the timer has been set, simply press the timer key for 3 seconds and then adjust the time as above.

To stop the beeper when it sounds, press any of the clock buttons.

Note: The oven does not switch off after the alarm has sounded.

Setting the Cooking Time

This function allows the oven to be set to cook for a fixed length of time. Once the time has elapsed the oven will switch off automatically.

Press the timer key for about 3 seconds. Press the key again until ‘dur’ appears in the display (Fig.2-7). Using the ‘+’ and ‘–‘ keys, set the required ‘cook time’. After a few seconds the settings will be memorised.

To Stop the Oven Cooking Time

This function is used to set the time at which an oven is to stop. It can be set to turn off at any time over the following 24-hour period.

Press the timer key for about 3 seconds. Press the key twice again until ‘End’ appears in the display (Fig.2-8). Using the ‘+’ and ‘–‘ keys, set the required ‘stop time’.

4

Page 6
Image 6
Rangemaster R9044 The Clock, Setting the Time of Day, Setting the Minute Counter, Setting the Cooking Time, Full grill