Grease filters
CLEANING METAL SELF- SUPPORTING GREASE FIL-
TERS
Alarm signal reset
•Switch off the lights and extractor motor.
•Press button T3 for at least 3 seconds, until the leds start to flash.
Cleaning the filters
•The filters are washable and must be cleaned at least every 2 months of operation, or more frequently for particularly heavy usage.
•Pull the Comfort Panel to open it.
•Remove the filters one at a time by pushing them to- wards the back of the group and pulling down at the same time.
•Wash the filters, taking care not to bend them. Allow them to dry before refitting.
•When refitting the filters, make sure that the handle is visible on the outside.
ATTENTION: Remove the filters one by one pushing them towards the back side of the hood and simultane- ously pulling downwards and towards the centre of the hood (only in case of 60 cm hood version).
EN |
| 1 |
| 11 |
