INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
kit. After converting the appliance please attach the Gas Conversion sticker over the appropriate area of the data badge, this will identify the gas type the appliance is now set for.
This appliance is designed for domestic cooking only. Use for any other purpose could invalidate any warranty or liability claim.
You will need the following equipment to complete the hotplate installation satisfactorily
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with the relevant standards.
MULTIMETER
(for electrical checks)
You will also need the following tools:
1.Electric drill
2.Jig Saw
3.Steel tape measure
4.Cross head screwdriver
5.Flat head screwdriver
6.4mm & 3mm Allen keys
7.Spirit level
8.Pencil
9.Adjustable spanner
Checking the parts
3 pan supports
Check that the appliance is in a good condition after having removed the packaging. In case of doubt, do not use the appliance and contact the retailer.
Never leave the packaging materials (cardboard, plastic bags, polystyrene foam, etc.) within children’s reach since they could become potential sources of danger
Positioning the Hotplate
The hotplate should be fitted into a worksurface which is at least 600mm deep. In position, it has a maximum thickness of 50mm from the top of the work surface. The cutout should be positioned centrally so that the spaces at the front and rear are the same. The diagrams below show the required cutout and the minimum recommended distances from the hotplate to nearby surfaces.
|
|
|
|
|
|
| 600mm |
|
|
| 468mm |
|
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
| minimum | |
|
|
|
|
|
|
| |
|
|
|
| 1150mm |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| cutout size | |||
Above hotplate level a gap of 75mm should be left between the left hand side of the hotplate and any adjacent vertical surface.
For
A minimum space of 650mm is required between the top of the hotplate and a horizontal combustible surface.
*Any hotplate hood should be installed in accordance with the hood manufacturer’s instructions.
Surfaces of furniture and walls at the sides and rear of the hotplate should be heat, splash and steam resistant. Certain types of vinyl or laminate kitchen furniture are particularly prone to heat damage and discolouration.
13 |
