17. To Change Oven Door Seal

Open oven door. The seal is held in place by small hooks on the rear face. At the corner pull seal diagonally away from the door centre until that hook is released. Proceed to the next hook and release it in a similar way, and so on.

Fig. 4

When fi tting new seal, position the seal join at the bottom. Hook the new seal in one of the corner holes of the door, and proceed round the door snapping in each hook in turn.

18. To Adjust Oven Door Catch Keep

Open oven door, slacken off locknut at base of keep, and screw in or out as required until required fi t is obtained. Retighten locking nut.

20. To Remove Oven Inner Back.

Open the oven door. Remove oven furniture. For the LH oven unscrew the 2 thermostat phial fixing screws.

Remove the fixings that secure the inner back to the oven rear.

Lift the removable panel away. Re-assemble in reverse order. Ensure that the retaining fi xings are fully tightened. For the LH oven unscrew the 2 thermostat phial fixing screws. Remove the screws that secure the inner back to the oven rear. Lift the removable panel away. Re-assemble in reverse order. Ensure that the retaining fi xings are fully tightened.

19.To Change Ignition Generator

Disconnect from electricity supply.

Pull cooker forward to gain access to the cover box at the rear of the left hand cooker. Remove the screws securing the cover and lift clear. Pull off all the leads to the generator noting their positions. Slacken the two screws holding generator to cooker and remove generator.

Fit new generator to cooker and replace leads. Reassemble in reverse order. Refer to wiring diagram. Check ignition performance.

22.To Replace an Oven Fan

Disconnect from electricity supply.

Pull the unit forward to access the cover boxes at the rear of the appliance. Remove the fi xings that secure the cover and lift it clear. Remove the fan wiring, noting the connection positions. Remove the inner back as detailed in Section 20. Hold the fan blades and undo the centre nut (LH thread), brass washers, fan blade and Circlip. Undo the fi xings that retain the fan and remove it from the cavity rear. Fit the replacement and re-assemble parts in reverse order. Check that the oven operates satisfactorily.

23.To Remove an Oven fan Element

Disconnect from electricity supply.

Remove the inner back as detailed in Section 20. Remove the fixings that secure the element within the oven and lift the element away carefully. Disconnect the leads and connect to the replacement element and re-assemble parts in reverse order. Check that the oven operates correctly.

35

Page 35
Image 35
Rangemaster U105510-01 manual To Change Oven Door Seal, To Adjust Oven Door Catch Keep, To Remove Oven Inner Back

U105510-01 specifications

The Rangemaster U105510-01 is an exceptional kitchen appliance that perfectly blends functionality and style, making it a must-have for discerning chefs and home cooks alike. This model is a showcase of advanced technology, robust construction, and user-friendly features, ensuring an efficient cooking experience.

One of the standout characteristics of the U105510-01 is its dual fuel capability. Integrating both gas and electric cooking methods, this range allows culinary enthusiasts to harness the precision of gas for high-heat searing alongside the even baking and roasting performance afforded by an electric oven. This versatility makes it an ideal choice for various cooking techniques.

The U105510-01 comes equipped with multiple cooking zones on its cooktop, featuring powerful burners that deliver rapid heat. With varying BTU ratings, users can easily switch between simmering delicate sauces and boiling water for pasta. The cast iron grates not only add durability but also provide a professional aesthetic, contributing to the range's impressive overall appeal.

In terms of oven features, the Rangemaster U105510-01 boasts a spacious interior with multiple shelves and versatile cooking modes. The oven includes a fan-assisted convection system that ensures even heat distribution, perfect for baking and roasting. The built-in thermometer allows chefs to monitor their cooking precisely, resulting in perfectly cooked dishes every time.

Safety is paramount in the design of the Rangemaster U105510-01. The unit features a flame failure device that automatically cuts off the gas supply should the flame go out. Additionally, the range is designed for easy cleaning, with removable oven doors and smooth surfaces that can be wiped down easily, ensuring that maintenance is hassle-free.

Aesthetically, the U105510-01 is available in various colors and finishes, enabling it to complement virtually any kitchen décor. Its sleek lines and commercial-style knobs deliver an attractive presence in modern and traditional kitchens alike.

In summary, the Rangemaster U105510-01 is a remarkable blend of innovative technology, robust performance, and sophisticated design. With its dual fuel capabilities, powerful burners, spacious oven, safety features, and stylish appearance, it is undoubtedly an excellent addition to any culinary space, catering to the needs of both amateur and professional cooks.