Rangemaster U105510-01 To Remove Grill Element, 25To Remove the LH Oven Bottom and Top Elements

Models: U105510-01

1 40
Download 40 pages 38.14 Kb
Page 36
Image 36
24.To Remove Grill Element.

24.To Remove Grill Element.

Disconnect from electricity supply.

Remove grill pan from grill chamber. From inside grill compartment remove enamelled front shield from grill roof, 2 screws and washers. Remove 2 screws and washers securing the grill element front support. Remove 1 screw from each of the grill elements and withdraw grill elements from grill chamber. Disconnect the leads and connect to the replacement elements and re-assemble parts in reverse order. Check operation of grill.

25To Remove the LH Oven Bottom and Top Elements

Disconnect from the electricity supply.

Bottom Element

Pull the cooker forward to access the cover boxes at the rear of the unit. Remove the fi xings that secure the cover and lift it clear.

Remove the 2 screws ‘A’ and allow the plate to drop down.

Remove the 2 screws B, holding the element to the bottom sheet..

Disconnect the leads, noting their positions.

Withdraw bottom element. Fit the new element and re-assemble parts in reverse order.

Top Element

Open the LH oven door and undo the fi xings that secure the heat shield. Remove the top element bracket fi xings and withdraw element. Replace the element and re-assemble parts in reverse order. Check that the oven operates satisfactorily.

26.To change oven light bulb.

Disconnect from the electricity supply.

Remove the oven furniture. Unscrew the bulb.

Fit an Edison screw fi tting 15w 125-130v lamp, FOR OVENS. It must be a special bulb, heat resistant to 300°C.

36

Page 36
Image 36
Rangemaster U105510-01 To Remove Grill Element, 25To Remove the LH Oven Bottom and Top Elements, To change oven light bulb