Rangemaster U110120 - 01A Securing the appliance in position, Alternative method of securing

Securing the appliance in position

1.Open the appliance door.

2.Using a suitably sized drill bit, drill through the three holes in the bracket into the worktop (fig.4-12).

IMPortant: Use a drill bit suitable for the worktop material.

3.Using the screws supplied, fix the bracket to the underside of the worktop. Fully tighten the screws.

4.Check that the door opens and shuts without snagging. Check that the door seals correctly.

Alternative method of securing

If your worktop is unsuitable for fixing in this manner, there are 2 securing points in each hinge bracket (fig.4-13).

Using the screws supplied, fix the appliance to the adjoining cabinet.

fig.4-11

Cover trim

Furniture door

fig.4-12

fig.4-13

11