4. Installation
Positioning Your Appliance
IMPortant: We recommend that two people install this appliance.
Choosing the Right Location
The appliance should be installed in a location where the ambient temperature corresponds with the climate classification as stated on the rating plate.
Your appliance may not function correctly if the ambient temperature falls outside of the following ranges.
climate | appropriate ambient |
classification | temperature |
|
|
SN | +10 to +32 °C |
|
|
N | +16 to +32 °C |
|
|
Avoid exposing the appliance to direct sunlight and sources of heat (such as radiators, heaters or cookers).
Make sure the appliance is installed with the correct ventilation requirements. Restricting ventilation can increase the energy consumption by 15%.
The door should be able to open completely and freely.
Locate the appliance so you can easily access the food that is stored in it.
Make sure there is an electrical socket available which will be accessible after your appliance is installed.
If this appliance is situated in a cold environment (such as a shed, outhouse or garage) it will affect its performance. You may find that the performance of the appliance is not consistent and this may damage foods. a consistent ambient temperature of 10 °c or above is recommended.
Reversing the Door
As supplied, the appliance door opens from the left. The door can be reversed so that it opens from the right.
this procedure MUst be completed before the furniture door is attached.
When reversing the door, keep any parts that you remove from the appliance for later use.
take care when opening the hinges, they are sprung loaded and there is the risk of injury if they close on your hand.
Tools required:
•Phillips screwdriver
•Flat bladed screwdriver
fig.4-1
600
600 max
ArtNo
All dimensions in mm.
7