Rangemaster U110120 - 01A manual Freezer Controls, During First Use, Setting the thermostat, 3

Models: U110120 - 01A

1 20
Download 20 pages 53.29 Kb
Page 6
Image 6
fig.2-2

fig.2-2

B

C

D

 

 

 

 

1

2

 

 

 

0

 

 

 

 

 

3

 

 

 

 

4

A

 

 

 

E

 

A – Fast Freeze switch,

B – Fast freeze light,

C – Temperature rise warning light, D – Power light neon,

 

 

E – Thermostat dial

 

fig.2-3

 

1

2

 

 

 

 

0

3

4

Freezer Controls

The freezer control panel is at the top of the freezer (fig.2-2).

A.Fast freeze switch.

B.Fast freeze light (Orange): this will light up when the fast freeze switch has been activated.

C.Temperature rise warning light (Red): this will light up when the appliance detects a rise in temperature that could affect the contents of your freezer.

D.Power light (Green): this will light up as soon as the appliance is connected to the mains supply.

Setting the thermostat

The thermostat control knob is located on the control panel at the top of the freezer (fig.2-3).

The thermostat automatically regulates the temperature inside of the freezer, depending on what number you have turned the thermostat control knob to:

Position [0] means that the freezer will not cool. However, the power light will still function.

Position [1] will give you a higher temperature inside of the freezer.

Position [4] will give you a lower temperature inside of the freezer.

Ideally the thermostat should be set to a position of between [2] to [3].

The freezer can cool to –18 °C and lower.

IMPortant: The ambient temperature of the room, the temperature of the food and the amount of food that has been placed in the appliance and how often the door is opened, will all affect the temperature being maintained by the appliance.

on the maximum setting (position [4]), the freezer will work harder to maintain a lower temperature. there is no need to run the appliance on this setting for long periods and you should return the thermostat knob to between [2] and [3].

During First Use

Switch on the appliance for the first time, and set the thermostat dial to maximum for 24 hours.

When you first switch on the appliance, the compressor will run continuously for approximately 24 hours or until the freezer reaches a cool enough temperature.

note: During this time, try not to open the door frequently or place a large amount of food within the appliance.

You should then adjust the thermostat dial down to its normal operating position.

If the unit is switched off or unplugged, allow at least 5 minutes before restarting the appliance on the thermostat or connecting it to your mains supply.

4

Page 6
Image 6
Rangemaster U110120 - 01A manual Freezer Controls, During First Use, Setting the thermostat, 3