Connections & Setup

Connecting the Device

This connection allows you to connect a device that has Y Pb Pr jacks (Component Video), for example, a DVD player. If the device you are connecting also has S-Video or composite video, we recommend you use the component video input for better quality.

Component Video cables (Y Pb Pr) are color coded- Green (Y), Blue (Pb) and Red (Pr).

Audio cables are color coded- Red= right audio; white= left audio

Using the example of a DVD player:

1.If necessary, connect your cable and/or antenna as described on page 5.

2.Connect your Y Pb Pr component video cables.

Connect three video grade cables to the Y Pb Pr jacks on the back of the TV and to the Y Pb Pr outputs on the DVD player. Y Pb Pr cables are colored green, blue and red. Just match the colors on the cables to the Y Pb Pr jacks.

3.Connect your audio cables.

Connect the audio (red and white) cables to the AUDIO R and L (COMPOSITE INPUT) jacks on the back of the TV and to the audio output jacks on the DVD player. Just match the colors.

Important - When using the Component video input (Y Pb Pr) jacks, use only the Audio R/L jacks from the COMPOSITE INPUT for this connection.

+•? ABC DEF

GHI JKL MNO

PQRS TUV WXYZ

DIG•ANA

Viewing the Picture from the Connected Device

The device in this example, a DVD player, is connected to the TV’s Y Pb Pr jacks. To view the DVD player:

1.Turn on the TV and the DVD player.

2.Press the INPUT button on the remote control to toggle through the Video Input Channels until you see CVID displayed in the channel banner.

INPUT button

• To review other connections, go to the next page.

• If you are done connecting devices to your TV, go to page 13 to complete the Initial Setup.

• If you want more details of the jacks on your TV, go to page 11.

Chapter 1



Page 11
Image 11
RCA 20F524T manual Connecting the Device, Viewing the Picture from the Connected Device