Connections & Setup
Explanation of Jacks
This section describes the jacks you can use to make connections. There are several combinations available to connect devices to your TV.
ANTENNA/
COMPONENT (CVID) INPUTCABLE INPUT
AUDIO/
VIDEO DIGITAL/
OUTPUT
ANALOG
Note: This back panel graphic is for representation only. Your TV’s back panel might be different.
R- AUDIO
COMPOSITE (VID) INPUT
ANTENNA/
CABLE
INPUT
R- AUDIO
COMPOSITE (VID) INPUT
COMPONENT (CVID) INPUT
R- AUDIO
COMPOSITE (VID) INPUT
ANTENNA/CABLE INPUT Connect either antenna or cable via coaxial (RF) cable to receive analog and digital channels through your cable provider. Receive
COMPOSITE (VID) INPUT Connect devices with Audio/Video (composite) outputs such as VCRs, DVD players, satellite receivers, cable boxes, camcorders and video game consoles. Connect the left and right audio jacks for sound.
•VIDEO Provides composite video connection. The video connector is usually yellow.
•
•
To access the device when using these jacks, press the INPUT button on your remote until VID appears.
Remember: You cannot use the composite and component connections at the same time. They share the same AUDIO R/L input jacks.
COMPONENT (CVID) INPUT Connect devices with component (Y Pb Pr) outputs such as VCRs, DVD players, DVRs, DVD recorders, satellite receivers, cable boxes and video game consoles. This connection provides optimum picture quality because the video is separated into three signals. Use the AUDIO L and R jacks from the COMPOSITE INPUT to connect for sound.
To access the device when using these jacks, press the INPUT button on your remote until CVID appears.
AUDIO/ VIDEO OUTPUT
Refer to page 8 for a detailed explanation of how to connect Y Pb Pr cables to your TV.
AUDIO/VIDEO OUTPUT (Models 24F512T, 20F512T, 20V412T and 20V500T
only) Connect your TV to external devices with inputs, such as VCRs, digital recorders or secondary monitors. Audio/video cables are used for this connection.
Chapter 1 | 11 |
