RCA 21015 manual Tone/Pulse, Time

TONE/PULSE

Most telephone systems use tone dialing, however, some may still use pulse (rotary) dialing. Depending on your telephone system, set the dialing mode as follows:

This setting may be made with the base only.

1. Use the touch-tone pad on the base to select 1TONE or 2PULSE, or use the or button to select 1TONE or 2PULSE. The default setting is 1.

2.Press the program/mute button to save. You will hear a confirmation tone, the selected dialing mode displays for two seconds, and SET TIME - - : - - AM PM shows in the display.

TONE

SET TIME --:-- AM PM

NOTE: Press the EXIT button once to keep the previous setting and return to standby mode.

NOTE: If you arenÕt sure which dialing system you have, set the telephone to tone dialing and make a test call. If the call connects, the setting is correct. If the call does not connect, set the telephone to pulse dialing.

TIME

This setting may be made with the base only.

1. Use the touch-tone pad to enter the current time. Press the or button to move the arrow to AM or PM. The default setting is 12:00 AM.

2.Press the program/mute button to save. You will hear a confirmation tone, the current time displays for two seconds, and DEFAULT SETTING 1YES 2NO shows in the display.

16