HANDSET SOUND SIGNALS
Signal | Meaning |
Three long beeps or continuous beeps | Page signal |
A long warbling tone (with ringer on) | Incoming call signal |
One short beep every few seconds | Battery low |
One long beep every few seconds (if talking) | Out of range |
|
|
ANSWERER STATUS INDICATORS
The following indicators show the status of the answerer.
Total number of messages. | |
CL (blinking) | The voice time/day stamp needs set. |
- - | Answerer off. |
An (blinking) | Currently answering a call. |
F (blinking) | Memory is full. |
Six bars (blinking) | Recording a memo or announcement. |
CAUSES OF POOR RECEPTION
•Aluminum siding.
•Foil backing on insulation.
•Heating ducts and other metal construction that can shield radio signals.
•You’re too close to appliances such as microwaves, stoves, computers, etc.
•Atmospheric conditions, such as strong storms.
•Base is installed in the basement or lower floor of the house.
•Base is plugged into AC outlet with other electronic devices.
•Baby monitor is using the same frequency.
•Handset battery is low.
•You’re out of range of the base.
29
