Using Your TV and Remote
With VCRs: Setting the VCR 1 Channel
The VCR 1 Channel works with VCR1 button on the remote. If the VCR 1 Channel is set, pressing VCR1 selects the channel to see the VCR picture. The VCR 1 Channel setting depends on which diagram you have used from the Connection Guide. If you want to turn this feature off, set the VCR 1 Channel to Disable. Refer to the chart below for your setting.
1.Select the Setup Menu
13
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13Clear
Channel Memory: 13 Stored
Cable/Air: Cable
A. Press TV to set the remote to control the TV.
B.Press MENU•PROG to select the Setup menu. This menu is white.
2.Highlight VCR1 Channel
13
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13Clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 03
A. Press MOVE H to highlight the VCR 1 Channel.
B.Press MOVE E to highlight the channel.
3.Enter channel number
13
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13Clear
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
A.Enter channel 00, 03, or 04. Choose your setting from the chart below. Press CHANNEL down until “Disabled” is displayed to turn the feature off.
| Diagram used from the | Set VCR 1 Channel to: |
| |
|
| |||
| Connection Guide: |
| ||
|
|
|
|
|
| 1B, 1C, 2B, 2C, 3B, 3C, 4C, 5C | 00 |
|
|
| 4B, 5B | 3 or 4 (same as 3/4 switch) |
| |
|
|
|
|
|
|
|
|
|
|
9
