Quick Guide to Your TV
Startup
The steps below will get your TV connected and ready for watching. For more details, see the page numbers listed.
1. Hook up your TV
Details are in the
Connections Guide.
Use This Book First!
CONNECTIONS
GUIDE
THIS GUIDE
SHOWS HOW
TO HOOK UP
YOUR TV
AND OTHER
COMPONENTS.
Hook up any antennas, cables or other equipment to your TV before you follow the steps below. This is where to find the instructions for SVHS, a super VHS recording format that improves the picture quality. It is found on some VCRs and camcorders.
To Find
Your
Turn To
Page 1
CAUTION: If you choose not to use the stand recommended for your TV, take precautions that the stand or furniture the TV is placed on is properly located and of adequate size and strength to prevent the TV from accidentally being tipped over, pulled off, or pushed off. This could cause damage to the TV and/or personal injury.
2. Plug in the TV
2a. Use this adaptor
for models RBA27550 and RCA27000
Plug the cord into the outlet, matching the wide and the small end of the plug with the outlet.
A.Plug the cord into the adapter that was packed with your TV as shown at the left.
B.Plug the adapter into the outlet, matching the prongs with the outlet.
3. Put batteries in the remote | A. Pull off the cover of the battery |
| compartment. |
B. Place the four AAA batteries as shown, matching the + and – end of each battery in the com- partment.
C. Replace the cover.
2
