Kenwood instruction manual Specifications, TH-F6A TH-F7E

SPECIFICATIONS

		General		TH-F6A	TH-F7E
Number of memory channels				400 channels + 35 special	400 channels + 34 special
				function memories	function memories
Antenna impedance (Connector type)				50Ω (SMA)
Operating Voltage		DC IN jack		DC 12.0 ~ 16.0 V (13.8 V nominal)
		Battery terminal		DC 5.5 ~ 7.5 V (7.4 V nominal)
Grounding method				Negative ground
		Transmit with H, 13.8 V		2.0 A or less
		(DC IN)
		Transmit with H, 7.4 V		2.0 A or less
		(PB-42L)
		Transmit with L, 7.4 V		0.8 A or less
Current		(PB-42L)
		Transmit with EL, 7.4 V		0.5 A or less
		(PB-42L)
		Receive (no signal)		100 mA (single band)/ 170 mA or less (dual-band)
		Battery Saver ON		30 mA (single band)/ 35 mA or less (dual-band)
		(Average)
Usable temperature range				–20°C ~ 60°C (–4°F ~ 140°F)
				–10°C ~ 50°C (+14°F ~ 122°F) with PB-42L
Frequency stability				Within ±8ppm (–20°C ~ 60°C)
				Within ±5ppm (–10°C ~ 50°C)
Dimensions (W x H x D Projections not included)				58 x 87 x 30 mm/ 2.3" x 3.4" x 1.2" with the PB-42L
				58 x 87 x 38 mm/ 2.3" x 3.4" x 1.5" with the BT-13
Weight				Approx. 250 g/ 0.55 lb with the PB-42L
				Approx. 280 g/ 0.62 lb with the BT-13
	Transmitter			TH-F6A	TH-F7E
Transmit Mode				F3E (FM)/ F2D (FM)
		2 m band		144 ~ 148 MHz	144 ~ 146 MHz
Frequency range		1.25 m band		222 ~ 225 MHz	N/A
		70 cm band		430 ~ 450 MHz1	430 ~ 440 MHz
			DC IN jack	H: 5.0 W (approx.)
				L: 2.0 W (approx.)
			(13.8 V)
				EL: 0.5 W (approx.)
		2 m band/	PB-42L	H: 5.0 W (approx.)
Output Power		1.25 m band/		L: 0.5 W (approx.)
			(7.4 V)
		70 cm band		EL: 0.05 W (approx.)
			BT-14	H: 0.5 W (approx.)
				L: 0.3 W (approx.)
			(6.0 V)
				EL: 0.05 W (approx.)
Modulation				Reactance
Maximum frequency deviation				±5 kHz (FM)/ ±2.5 kHz (NFM)
Spurious emissions (at high transmit power)				–60 dB or less
Microphone impedance				2kΩ

1Specifications are guranteed within 438 ~ 450 MHz.

53