Kenwood TH-F7E Example 1 100 MHz f 1000 MHz, 3 , 2, 1 , 4, Example 4 f 1000 MHz, 1 , 2 , 5, 8, 1

3 GETTING ACQUAINTED

Example 1 (100 MHz < f < 1000 MHz)

To enter 438.320 MHz:

Key in	Display
[ENT]	– – – – – –
[4], [3], [8]	4 3 8. – – –
[3], [2], [0]	4 3 8. 3 2 0

Note: You do not have to press [MHz] when you are entering 3-digit MHz number.

Example 2

To enter 439.000 MHz:

Key in	Display
[ENT]	– – – – – –
[4], [3], [9]	4 3 9. – – –
[ENT]	4 3 9. 0 0 0

Example 3

To revise 144.650 MHz to 145.650 MHz:

Key in	Display
	1 4	4.	6	5	0
[ENT]	– – –		– – –
[1], [4], [5]	1 4 5.		– – –
[VFO]	1 4 5.		6 5 0

Example 4 (f > 1000 MHz)

To enter 1250.500 MHz (B-band only):

Key in	Display
[ENT]	– – – – – –
[1], [2], [5], [0]	12 5 0.	– – –
[5]	12 5 0.	5 – –
[ENT]	12 5 0.	5 0 0

Example 5 (f < 100 MHz)

To enter 10.500 MHz (B-band only):

Key in	Display
[ENT]	– – – – – –
[1], [0]	1 0	–	– – –
[MHz]	1	0.	– – –
[5]	1	0.	5	– –
[ENT]	1	0.	5	0 0	0

Note: When pressing the last [ENT], the Fine Tuning function is automatically activated for 10.5000 MHz.

Example 6

To enter 810 kHz (B-band only):

Key in	Display
[ENT]	– – –	– – –
[0]	0 – –	– – –
[MHz]	0. – – –
[8], [1], [0]	0. 8 1 0

Note:

◆If the entered frequency does not match the current frequency step size, the frequency is automatically rounded down to the next available frequency.

◆When the desired frequency cannot be entered exactly, check whether the Fine Tuning function is ON or not {page 35}, and then confirm the frequency step size {page 37}.

◆Some frequency ranges are blocked, due to government regulations. Refer to the specifications {pages 53, 54} for the TX/ RX coverage.

◆If you turn the Tuning control or press [ ]/ [ ] while entering the frequency, the transceiver clears the entry and recovers the previous frequency and mode.

8