Kenwood TH-F7E, TH-F6A instruction manual Interfacing to Peripherals, Band

14 INTERFACING TO PERIPHERALS

Since the transceiver can receive 2 different frequencies, it outputs the squelch status (REM/SQ) as shown the table below.

Press [BAL] to set the Volume balance {page 41}.

VOL	REM/SQ Sensing Band
Balance
	A-band

A-band and/or B-band

(logic sum)

B-band

■PC

If you want to connect the transceiver to a PC in order to manage the memory channels in the transceiver, you need an interface cable. You will also need the supported software to download, upload, and edit the memory channel contents of the transceiver.

To manage the memory contents in the transceiver from a PC, access Menu No. 9 and select “PC”.

PC with a serial (COM) port

PC Interface cable

TH-F6A/ TH-F7E

For your information, the following diagram shows how the TH-F6A/ TH-F7E communicates to the PC using a serial (COM) port.

Note: Contact an authorized dealer for the PC Interface cable availability.

TH-F6A/ TH-F7E

SP

MIC

Level

converter COM port

	RXD
2.5 mm	DTR
Plug	DSR
	GND
3.5 mm	RTS
Plug	CTS
	TXD

46