Kenwood TH-F6A Models Covered By This Manual, Market Codes, Notice To The User, Precautions

Models: TH-F6A

1 64
Download 64 pages 11.08 Kb
Page 2
Image 2
MODELS COVERED BY THIS MANUAL

MODELS COVERED BY THIS MANUAL

The models listed below are covered by this manual.

TH-F6A:144/ 220/ 440 MHz FM Tri-band

Portable Transceiver

TH-F7E:144/ 430 MHz FM Dual-band Portable Transceiver

MARKET CODES

K-type:The Americas

E-type:Europe/ General

T-type:The United Kingdom

The market code is shown on the carton box.

Refer to the specifications {pages 53, 54} for the information on available operating frequencies within each model.

NOTICE TO THE USER

One or more of the following statements may be applicable for this equipment.

FCC WARNING

This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer for technical assistance.

PRECAUTIONS

Please observe the following precautions to prevent fire, personal injury, or transceiver damage:

Do not transmit with high output power for extended periods. The transceiver may overheat.

Do not modify this transceiver unless instructed by this manual or by KENWOOD documentation.

When using a regulated power supply, connect the specified DC cable (option) to the DC IN jack on the transceiver. The supply voltage must be between 12 V and 16 V to prevent damaging the transceiver.

When connecting the transceiver to a cigarette lighter socket in a vehicle, use the specified cigarette lighter cable (option).

Do not expose the transceiver to long periods of direct sunlight nor place the transceiver close to heating appliances.

Do not place the transceiver in excessively dusty areas, humid areas, wet areas, nor on unstable surfaces.

If an abnormal odor or smoke is detected coming from the transceiver, turn OFF the power immediately and remove the battery case or the battery pack from the transceiver. Contact your authorized KENWOOD dealer, customer service, or service station.

Page 2
Image 2
Kenwood TH-F6A, TH-F7E instruction manual Models Covered By This Manual, Market Codes, Notice To The User, Precautions