References
Trouble Checks
You may have problems that can be fixed with a few minor adjustments. Look for the type of problem you are having below and then try the suggestions to get your TV going again.
Trouble | Checks and Adjustments |
|
|
Power |
|
TV will not turn on | Plug TV in. |
| Plug something else into the outlet to make sure it is working. |
| Make sure batteries in the remote are not dead. |
| Aim the remote at the TV and press POWER. |
| Make sure batteries are placed in the remote the right way. See batteries |
| on page 2. |
| Unplug TV for a few minutes and then turn it on again. |
No picture, no sound but TV has power
Check antenna connections.
Check position of Cable/Air feature. See page 24.
Try another channel. Inactive channel may be tuned.
Make sure component connected to the VIDEO INPUT jacks is turned on if you choose channel 00.
Make sure TV is tuned to the same channel as the switch on back of VCR if watching a VCR.
Make sure TV/VCR button on VCR is in correct position when using VCR.
Picture
Blank screen or Unusable Signal appears on screen
Picture poor, sound okay
Sound
Noisy stereo reception
Picture okay, no sound
Picture okay, sound poor
Try another channel. Inactive channel may be tuned.
Scan the channels.
Check antenna connections.
Adjust TV picture. See pages
Turn Stereo off. The stereo broadcast may not be clear. See page 18.
Press VOLUME + or MUTE to restore sound.
Try another channel.
Try adjusting the Stereo or Tone. See page 18.
Change Stereo to off. The stereo broadcast may not be clear. See page 18.
No stereo on stereo station | Make sure Stereo is turned on. See page 18. |
27
