Using Advanced Features
Placing Channels in Memory (Autoprogramming)
Only channels
You may want to add or delete a few channels if some stations have weak signals or were off the air when the TV was programmed. Refer to the Add or Delete Channels section below.
1.Place channels in memory (Autoprogram)
2.Add or delete channels
13
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13Clear
Channel Memory: 13 Stored
Cable/Air: Cable
15
Controls Alarm Adjust Setup
English Français Português
Autoprogramming
Label: 13Clear
Channel Memory: 13 Stored
Cable/Air: Cable
13
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13Clear
Channel Memory: 13 Stored
Cable/Air: Cable
A. Hook up an antenna, cable |
or components before you |
begin these steps or you will |
not be able to add channels |
into memory. |
B. Press MENU•PROG repeatedly |
to select the Setup Menu and |
highlight Autoprogram. This |
menu is white. |
C. Press MOVE H to highlight |
Autoprogram. |
D. Press MOVE E to start the |
TV adding all active channels |
into memory. |
E. Wait until the TV has cycled |
through all the channels and |
returns to the original channel. |
A. Press MENU•PROG repeatedly |
to select the Setup menu. This |
menu is white. |
B. Press MOVE H to highlight |
Channel Memory. |
C. Press MOVE E to underline the |
channel number. |
D. Select the channel number you |
want to add or delete with the |
number buttons. |
13
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13Clear
Channel Memory: 13 Erased
Cable/Air: Cable
E. Press MOVE E to add or delete |
a channel (you will see Stored |
on the screen when added and |
Erased when deleted). |
F. Repeat D and E for more |
channels. |
19
