CONNECTING SPEAKERS

1.Make sure the power is turned off to prevent possible damage to the system.

2.Connect each pair of speaker wires to the color-coded connectors on the back of each speaker, and to the matching connectors on the back panel of the system (Center = blue, Front = red, Surround = gray, Subwoofer = black).

3.To insert a speaker wire, press down on the red or black thumb lever, insert the tip of the wire, and then release thethumb lever to lock the wire in place.

CAUTION : Short circuits may damage the system. Make sure the exposed tip of each speaker wire does not touch another speaker wire or terminal.

NOTE: To obtain the best possible surround sound, use the test tone feature and balance the speakers (see “Audio Menu” on Page 16, and “Adjusting Speaker Levels” on Page 24.)

12