2.Insert the disc you wish to copy in the DVD deck and close the disc tray.
3.Insert a standard VHS tape with a record safety tab into the VCR deck.
4.Press COPY on the system front panel.
The DVD will begin playback and the VCR will begin recording. If the DVD disc menu appears, press PLAY to start copying.
5.When the DVD is finished playing, press VCR on the remote control and then press STOP.
NOTES:
•You must stop the copy process manually when the DVD movie ends, or the DVD may replay and record over and over again.
•If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision® encoded DVDs.
SETTING A TIMED RECORDING
Follow these instructions to program the VCR to record up to eight television shows.
1.Turn on the system and press
2.Press SETUP/MENU on the remote control.
3.Use the arrow keys to select TIMER, and then press ENTER/SET.
If you have not set the clock, the CLOCK menu will appear. Set the clock.
4.Use the up/down arrow keys to select any available event and then press ENTER/SET.
The first four events are on page 1 (labeled 1/2), and the second four events are on page 2 (labeled 2/2).
5.Use the up/down arrow keys to set when to record, and then press g. Choose one of these options.
1/01 — Records only on the selected date.
DAILY — Records every day.
SUN/MON/TUES/ETC. — Records every week on the same day.
6.Use e / d to set the channel to record, and then press g.
7.Use e / d to set the starting time, and then press g. Press the AM/PM button to select AM or PM.
8.Use e / d to set the stop time, and then press g. Press the AM/PM button to select AM or PM.
9.Use e / dto set the record speed (SP or EP), then press g.
10.When finished, press ENTER/SET to save the programmed event.
11.Repeat steps
SETUP/MENU to exit.
12. Press POWER to turn off the system.
NOTES:
•To cancel a recording, highlight it in the timer record menu and press
RETURN/CANCEL.
•The system must be turned off for timed recordings.
BASIC DISC FUNCTIONS
Playing a DVD, CD or VCD
Follow these steps to play a DVD, CD or VCD.
1.Turn on the system and press DISC on the remote control, or rotate FUNCTION SELECTOR to select DISC.
2.Press OPEN/CLOSE on the front panel to open the disc tray.
3.Place the disc in the tray with the label side facing up. If the disc has two sides, place the disc with the desired side facing down.
4.Press OPEN/CLOSE again to close the disc tray.
5.Most discs will play automatically when the disc drawer closes. If not, press PLAY.
If the DVD has a disc menu, or more than one title, the disc menu may appear.
Disc Menu Navigation
Use the following keys to navigate DVD disc menus.
DISC MENU — Press to display the disc menu for the currently loaded disc.
f/ e / g / d — Press to highlight options in the disc menu.
ENTER/SET — Press to confirm selections in the disc menu.
RETURN/CANCEL Press to display the previous menu or to exit the disc menu.
20