SETUP

RUNNING AUTO SETUP

Connect the power cord to a standard 120VAC/60Hz electrical outlet, but DO NOT PRESS THE POWER BUTTON AT THIS TIME. Let the Auto Setup run first.

The Auto Setup feature automatically searches for channels and sets the clock when a cable from an antenna or cable TV outlet is connected to the IN (FROM ANT.) jack on the back panel and the power plug is connected to an AC outlet. DO NOT PRESS THE POWER BUTTON until Auto Setup is complete. Auto blinks on the front panel display while Auto Setup is in progress. When Auto Setup is complete the correct time is displayed

The unit will search for all TV channels in your area. This may take several minutes.

You can also search for channels manually, add/erase channels, or search for cable TV channels (see “Channel Preset” on Page 17.)

The unit will find a TV station broadcasting the time (via Extended Data Services, or EDS) and set the clock.

If the clock is set incorrectly, or if you wish to program a timer recording immediately, you can set the clock manually (see “Setting the Clock Manually” on Page 18.)

Auto Setup is complete when “Auto” stops blinking and the correct time appears on the front panel display.

NOTE: If you plug in the unit before you connect the antenna, Auto Setup will not be able to preset channels into memory. If this occurs, unplug the unit for several minutes. Check the cable or antenna connection and plug in the unit again. Auto Setup will automatically begin again.

POWER ON THE SYSTEM

Press POWER on the front panel, or the remote control, to turn on the unit.

About Standby Mode

•The system is always in Standby mode when the AC power cord is plugged into an electrical outlet.

•In Standby mode, the clock is shown on the front panel display and the blue power indicator light turns off.

•In Power On mode, the system status is shown on the front panel display and the blue power indicator light turns on.

•The only way to power on the main unit is to press POWER on the front panel or remote control.

DVD SETUP MENU

Video Menu

The Video Menu allows you to set TV Display, Video Output and OSD (On-Screen Display) Language.

1.Press DISC on the remote control, or rotate FUNCTION SELECTOR to select the DISC function.

2.Press SETUP/MENU to view the DVD Setup Menu.

Playback must be stopped in order to view the DVD Setup Menu.

3.Use d and e to select VIDEO MENU and then press

ENTER/SET.

4.Use the arrow keys to select each of the following, and then press ENTER/SET to set your preference.

TV Display:

Some DVDs have both letterbox (widescreen) and pan/scan full screen) versions on the same disc. The TV Display option sets your viewing preference if this occurs.

4:3 Letterbox: Select if you have a standard 4:3 television and prefer to watch the letterbox (widescreen) versions of DVD movies. Movies will display with black bars above and below the picture.

4:3 Pan/Scan: Select if you have a standard 4:3 television and prefer to watch the full-screen versions of DVD movies.

16:9 Widescreen: Select if you have a widescreen 16:9 television.

OSD Lang:

OSD LANG sets your preferred language for the DVD setup menu and on-screen displays. Select English, French or Spanish.

5.Press SETUP/MENU to save and exit.

15