![](/images/new-backgrounds/1312574/312574103x1.webp)
Playback
Tape window
Cassette tape adapter
Inserting the Tape into the Cassette Tape
Adapter
1. Before inserting the tape into the adapter, remove any slack in the tape by turning the tape wheel on the side of the tape.
2. Slide EJECT to the right to open the tape compartment lid.
3. Insert the tape with the tape window on the left
Tape wheel | and facing up. |
|
Allow the tape to drop into the adapter. Do not
force the tape.
4.Gently close the tape compartment lid until it locks into place. Make sure the tape reel area
under the adapter is free to turn while the tape is loading.
Note: You should hear a whirring sound while the tape loads.
EJECT switch
50 | Chapter 4 |