Recording
|
| STOP |
| R | RETAKE | F |
|
| |
LIGHT | AUTO ON | COUNTER | R/M |
| IPE |
| CHARGE | POWER REFRESH | EJECT |
| OFF |
|
| DIGIFECT |
|
| |||
|
| FADE/W |
|
|
| ||||
|
| P . | AE |
|
| ||||
|
|
|
|
|
|
|
|
| |
Video LIGHT switch (CC6374 only)
Video Light Details
Even if the battery icon (
) doesn’t blink due to low battery charge, the camcorder may turn off automatically when you turn on the video light, or if the video light is turned on when you start a recording.
When LIGHT OFF/AUTO/ON switch is set to AUTO:
•The video light may keep turning on and off depending on the lighting conditions. If this happens, manually switch the light ON or OFF using the LIGHT OFF/AUTO/ON switch.
•If the Sports or High Speed Shutter mode is turned on, the video light is likely to stay on.
•While in Twilight mode, the light won’t activate.
Notes:
•The video light can only be used when the camcorder is on.
•Set the white balance to artificial light
(
) when using the video light to avoid a
•When not using the video light, turn it off to save battery power.
Cautions
•Never operate the video light closer than 1 foot to people or other objects.
•The video light becomes very hot. Do not touch it during use or right after use. Serious injury may result.
•Do not place the camcorder in a carrying case right after using the light.
•Never operate the video light close to flammable or explosive material.
•Consult your nearest RCA authorized service center to replace the video light.
•The video light and bulb need to cool for approximately 30 minutes after use before the bulb assembly is replaced.
Chapter 3 | 41 |
