![](/images/new-backgrounds/1280399/28039935x1.webp)
Chapter 2: Using the Remote Control
Indicator
The Buttons on the Remote Control
To enter a
ANTENNA If you program the AUX•HD button to control a VCR, this button works as a TV/VCR button for some VCRs when the remote is in AUX•HD mode. If you program the AUX•HD button to control a satellite receiver, this button works as a TV/SAT button for some satellite receivers when the remote is in AUX•HD mode.
Arrows Used to highlight different items in the TV or DVD menu and to adjust the menu controls. The up and down arrows move the PIP window when no menus are on the screen.
When watching TV without the PIP window or menu system in use, the left and right arrows (ZOOM
AUX•HD Puts the remote in AUX•HD mode. As a default, this button controls some models of RCA HDTV Tuners. It can also be programmed to operate some brands of an additional
CC/ SUBTITLE In TV mode, brings up the Closed Caption menu. In DVD mode while a disc is playing, brings up the information banner with the subtitle icon highlighted.
CH + or CH - Scan up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels. In DVD mode while a disc is playing, CH+ advances to the next chapter; CH- goes to the preceding chapter.
CLEAR Removes any menu or display from the screen and returns you to normal viewing. Also exits PIP or POP if no menu is displayed.
DVD Puts the TV/DVD and remote in DVD mode. Also displays the current DVD status. Turns on the TV/DVD in DVD mode if it's off.
GO BACK In TV mode, returns you to the previous channel. In DVD mode, returns to the previous screen.
GUIDE In TV mode, brings up the Channel Guide menu. In DVD mode, brings up the DVD guide (if available).
INFO In TV mode, makes the channel banner appear and disappear. In DVD mode, makes the info banner appear and disappear.
Indicator Indicates the programming mode when programming the remote to control other components. The indicator lights up when you press a valid button on the remote. It flickers when the remote batteries are low and you press a button.
INPUT Accesses the available video input channels (VID1, VID2, FRNT, CMP1, and DVI). Press the CH+ or CH- button to resume TV viewing.
16 | Graphics contained within this publication are for representation only. | Chapter 2 |