FIRST THINGS FIRST

JACKS AND CABLES

S-Video Jack and Cable

The S-Video jack provides the best picture quality for your DSS® system.

This jack is available on many TVs and is used in conjunction with

S-Video Jack

audio cables to connect the DSS® receiver to your TV. Remember

 

also to connect the left and right audio cables because the

 

S-video jack carries only the picture signal, not the sound.

 

Audio/Video Jacks and Cables (RCA-type)

The audio/video jacks provide very good picture and stereo sound quality, and should be used if your TV has no S-Video jack.

Theses jacks are used for most audio/video connections between

Audio/Video Jacks

components. The DSS® receiver audio/video jacks are color coded

 

(yellow for video, red for right audio, and white for left audio). If

 

your TV has only one input for audio (mono), connect it to the

 

right (red) audio jack on the DSS® receiver.

 

RF Jacks and Coaxial Cables (F-type)

The RF jacks provide good picture and mono sound quality, and are to be used if audio/video connections are not available for your TV.

These jacks are required for antenna or cable-TV connections.

RF Jack

The RF jacks on the DSS® receiver are labeled IN FROM ANT and

 

OUT TO TV. The coaxial cable supplied with your DSS® system is

 

used to connect the RF jacks between the DSS® receiver and your

 

TV’s antenna input.

 

VCR Controller Jack and Cable

The VCR controller cable plugs into a jack on the DSS® receiver’s

VCR Controller Jack

back panel. The other end of the cable affixes to your VCR’s

 

remote sensor.

 

9

Page 11
Image 11
RCA DRD202RA manual Video Jack and Cable, Audio/Video Jacks and Cables RCA-type, RF Jacks and Coaxial Cables F-type