![](/images/new-backgrounds/1305611/305611129x1.webp)
REFERENCE
PROGRAMMING THE REMOTE TO CONTROL
OTHER DEVICES
The AUX button is a device button that can be programmed to control a second VCR, a cable box, or a laserdisc player.
1.Turn on the device to be programmed.
2.Look up your brand and its code number on code list on the following pages.
3.Press and hold the AUX button.
4.Enter the
6.Release the AUX button and press POWER or CHAN UP/DOWN to see if the device responds to the remote commands.
7.Repeat these steps using the next code listed for your brand until the device responds to the remote commands.
This remote may not operate all models of the brands that are shown. Use the codes shown in this manual, or on the sheet packed with your remote.
After you program the remote to control a device, record your AUX code here for easy reference.
USING THE REMOTE BUTTONS TO CONTROL A
DEVICE
Once the remote has been programmed with the correct codes, you are ready to use it to control your devices.
To operate the device:
1.Press the device button (TV, DSS1, DSS2, VCR, or AUX) to set the remote to control the device.
2.Press POWER to turn the device off or on.
3.Use the remote buttons that apply to that device.
63