Connecting the DSS Receiver
Choosing a Connection
The following pages show four examples of hookups commonly used to connect the DSS receiver with a TV and other components. Refer to your TV and VCR Owner’s Manuals for more information on hooking up your specific components.
The four hookup diagrams are:
Connection A
Provides the best possible picture and stereo audio quality.
To use Connection A, you must have:
•TV with
•VCR with RF and audio/video inputs and outputs
•
Connection B
Provides very good picture and stereo audio quality.
To use Connection B, you must have:
•TV with separate RF and audio/video inputs (jacks)
•VCR with RF and audio/video inputs and outputs
•Coaxial and audio/video cables
Connection C
Provides good picture and mono audio quality.
To use Connection C, you must have:
•TV with RF input (jack)
•VCR with RF and audio/video inputs
•Coaxial and audio/video cables
Connection D
Provides good picture and mono audio quality.
To use Connection D, you must have:
•TV with RF input (jack)
•Coaxial cables
43
