RCA F20648 Jacks on the Back of Your TV, Audio and Video Input Jacks Audio R and L/MONO and Video

Connections & Setup

Jacks on the Back of Your TV

If you are connecting many components, please consult the manual that came with each component for connection instructions. The picture of your TV’s back panel describes the jacks on the back of your TV and what types of components that you can connect to these jacks.

When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right

Audio to Right Audio, etc.

Audio and Video Input Jacks: AUDIO R and L/MONO and VIDEO

Connect any of the following components:

•	DVD Player	•	Satellite Receiver
•	Laserdisc Player	•	VCR

•Internet Access Device

To watch the content from the component that’s connected to the VIDEO Input Jack, press the

WHO • INPUT button on the remote (the TV switches to the correct channel).

Audio Output Jacks: R and L OUT

Connect audio cables to these jacks and to an amplifier or audio receiver for improved sound quality.

TV (back panel)

VIDEO		AUDIO
	R	L / MONO
		IN
	R	L
		OUT
		CABLE/
G-LINK		ANTENNA
		S-VIDEO

G-LINK Jack S-VIDEO Jack CABLE/ANTENNA Jack

Connect the end of the G-LINK cable (provided) to this jack. The G-LINK cable enables the TV’s Guide Plus+ system to interact with the cable box and/or the VCR. A picture of the G-LINK cable is on page 7.

Connecting an S-Video cable is optional. S-Video provides better picture quality than a regular video cable.

Connect the coaxial cable from the VCR’s Output jack to this jack. If you’re not connecting a VCR, connect a coaxial cable that carries the signal from the antenna, cable, or cable box to the CABLE/ANTENNA jack.

Chapter 1 13