7.Make the appropriate selection from the displayed text menu, shown here.
0)Exit
1)Image Unpack
2)Reset Network Config
3)Reset Password File
4)Copy Log Files
5)Remove Switch Config
6)Remake Filesystem
7)Reset Switch
8.Refer to the “Recovering a switch” section of the SANbox2 Fibre Channel Switch Installer’s/User’s Manual for detailed explanations of the various choices. For example, you might use item 2 to reset the switch’s Ethernet IP address to 10.0.0.1, or item 3 restore the admin password to password (password). Choose item 7 to reboot the switch with the new parameters.
9.Use option 7 to close the communication session, exit Force PROM mode, and reboot the switch with the new configuration.
28 | Fibre Channel Switch | 16 April, 2003 |
