References
___ The correct lamp replacement unit. To order the correct lamp, you’ll need to know your TV’s model number, serial number, and lamp
___ The box that the lamp replacement unit came in.
1. Read the precautions listed above.
2.Make sure your hands are dry and clean before you begin replacing the lamp.
3.Unplug the TV’s power cord from the wall outlet (or power strip). Unplug the power cord from the back of the TV.
4.Put the power cord far away from the TV. Taking this precaution will ensure that no one plugs in the TV if you walk away from it, or when you’re waiting for the lamp unit to cool, or when you’re installing the new lamp.
5.Wait 30 minutes so the lamp can thoroughly cool. If you don’t wait at least 30 minutes, you risk getting injured!
6.After 30 minutes, go to the back of the TV set and find the
Note: Do not attempt to repair the lamp. Do not open the lamp assembly unit — leave the lamp in its casing.
Step 6 | Service Model |
| Number |
| Sticker with |
| Lamp Type |
7.Loosen the screw on the door (don’t remove the screw, just loosen it).
Note: Don’t use a coin to loosen the screw because the coin could fall into the TV.
8.Press the catch tabs near the screw you just loosened (one tab is above the screw and one is below), and remove the entire lamp access door. Place the door to the side (don’t put it on the floor or anywhere someone might step on it or accidentally break the tabs).
Steps 7 and 8
68 | Chapter 5 |
