CUSTOMIZING FUNCTION SETTINGS
Dolby Pro Logic Mode
CENTER DELAY
1. | Repeatedly press FUNCTION until DVD appears. | ||
2. | Press STOP . | ||
3. | Press SETUP. |
| |
4. | Press | or | to select Audio. Press ENTER. |
5. | Press | or | to select Center Delay. Then repeatedly press |
ENTER until the desired Center Delay type (0ms, 1ms, 2ms, 3ms, 4ms, or 5ms) appears.
6. Press RETURN Dto exit and return to the normal screen.
Note: This delay adjustment depends on the location of your center speaker. If the distance between the center speaker and the listener is less than the distance between the front right and left speakers and the listener, this delay adjustment is balanced. The relationship depends on the room, for example, if the distance of the center speaker is two feet less than the front right/left speaker, the center delay can be set to 2ms. However, the best setting must be judged by the listener.
PINK NOISE
This feature lets you test your speakers’ output to ensure they are connected and operating properly.
1. | Repeatedly press FUNCTION until DVD appears. | ||
2. | Press STOP . | ||
3. | Press SETUP. |
| |
4. | Press | or | to select Audio, press ENTER. |
5. | Press | or | to select Pink Noise, then press ENTER. |
6. | Press | or | until the desired setting appears, and then press |
| ENTER. |
|
|
• Off: Pink noise test mode should always be off, unless you are
testing your speakers.
•Left: The front left speaker emits pink noise.
•Center: The center speaker emits pink noise.
•Right: The front right speaker emits pink noise.
•Left Sur: The rear surround left speaker emits pink noise.
•Right Sur: The rear surround right speaker emits pink noise.
•Subwoofer: The subwoofer emits pink noise.
7.Press RETURN Dto exit.
Note: You can press SOUND to adjust the channel balance. See “Adjusting The Sound” on Page 29.
ADJUSTING THE SOUND
ADJUSTING SURROUND SOUND BALANCE
1.Repeatedly press SOUND until the desired speaker appears.
•Front left speaker — LEFT appears.
•Front right speaker — RIGHT appears.
•Center speaker — CENTER appears.
•Rear left speaker — REAR L appears.
•Rear right speaker — REAR R appears.
•Subwoofer — WOOFER appears.
2. Press | or | to adjust the sound level. |
If you do not press any buttons within a few seconds, the display returns to normal.
ADJUSTING SOUND QUALITY
You can control the Bass, Middle, and Treble ranges on your front left and right speakers.
1.Repeatedly press SOUND to select an equalization mode (BASS, MIDDLE, TREBLE).
•BASS — low sounds
•MIDDLE — middle sounds
•TREBLE — high sounds
2. Press | or | to adjust the selected sound level. |
29